Mounting is a very important part in the preparation of metallographic samples, especially for some samples that are not easy to hold, small samples, samples with irregular shapes that need to protect the edges, or samples that require automatic grinding and polishing. Mosaic is an essential process.YZXQ-1A Automatic Mounting Machine, It is an advanced hydraulic water-cooled automatic sample inlaying device. The inlaying process is controlled by a single-chip computer program, which realizes one-click operation of the inlaying process such as heating, pressurization, pressure holding, cooling, and pressure relief. Automatic completion of specimen mounting. The machine uses a hydraulic pump to pressurize, the pressure is greater, and the inlaid samples are more compact; the mold cavity is lengthened, and two samples can be produced at the same time by using an isolation block; the special cold and hot separation design makes the operation safer and more stable; HD touch screen and physical Double-button control, the inlay scheme can be saved, and it is convenient to retrieve; equipped with water cooling system, the sample preparation speed is fast, and two sample inlays can be completed as fast as 7 minutes, making the sample preparation easier and more labor-saving, and the inlay quality is better and more stable. (Limited thermosetting materials, such as bakelite powder, electric jade powder, etc.)

Product Highlights ? Lengthen the cavity, and use the isolation block to make two samples at the same time ? Heating, pressing, holding, cooling, unloading, one-touch operation ? Special cold and heat separation design for safer and more stable operation ? Dual control of touch screen and physical buttons can save the mosaic scheme for easy retrieval Scope of application Metallographic YZXQ-1A Automatic Inlaying Machine is suitable for small, irregularly shaped samples that require edge protection or samples that require automatic grinding and polishing.

The main parameters of Metallographic YZXQ-1A Automatic Inlaying Machine

Mold sleeve specifications	Ф25mm，Ф30mm，Ф40mm
Cavity height	140mm, effective height 85mm, 2 specimens can be set at the same time
Heating power	Ф25mm  1kW;  Ф30mm  1.2kW;  Ф40mm  1.6kW
Pressure setting range	50~200bar（Factory setting: 150bar, equivalent to 15Mpa, 150kgf）
Heating setting range	50~180℃ （Factory setting: 120 ℃）
Heating time	User-defined 1 ~ 7 minutes (factory setting 4 minutes 30 seconds)
Compress time	User-defined 30 seconds to 7 minutes (factory setting 1 minute)
Cooling time	User-defined 30 seconds to 7 minutes (factory setting 1 minute)
Total mosaic time	Two samples of Ф30 size take about 7 minutes and 30 seconds, and two samples of Ф40 size take about 9 minutes
Cooling method	External water source cooling
Input power	Single-phase 220V, 50Hz, 10A
Dimensions	530 × 510 × 480mm cover height 85mm
Net weight	60Kg